13893342384
You have no unread inquiry information!
Information dynamics
Current position Current Location:首页 > Information dynamics > Company news

What are the levels of anti-wear hydraulic oil quality inspection?

Category: Company News    Release time: 2022-05-18    Author: Gansu Liulian lube oil manufacturer
  Share to:   
Qr code sharing

    The oxidation level of anti-wear hydraulic oil。In the use of anti-wear hydraulic oil, because of the change of ambient temperature, the effect of oxygen in the air and sunlight, it may be slowly oxidized, so that its viscosity and other characteristics change。The level of air oxidation, usually fromGansu hydraulic oilThe color, smell distinguish。If the hydraulic oil is dark brown in color and has a rancid smell, it indicates that it has been oxidized。The darker the brown, the more rancid the smell, the stronger the level of oxidation。At this time, you should replace the new oil。

Gansu hydraulic oil

    The level of moisture content in anti-wear hydraulic oil。If the anti-wear hydraulic oil is mixed with water, it may reduce its lubrication performance and etch metal materials。Identify the level of water infiltration in hydraulic fluid,There are usually two ways: one is based on the transformation of its color and smell,Such as the color of hydraulic oil is milky white,The smell hasn't changed.,It shows that people have too much water;The second is to take a little hydraulic oil drops on the hot stainless steel plate,If there is a "horn" sound,It indicates moisture。At this time, you should replace the new oil。
    Lanzhou anti-wear hydraulic oilA condition with debris in it。After working in the mechanical equipment for a period of time, take a few drops of hydraulic oil into your hand, twist it with your fingers, and see if there are metal particles, or if there are small bright spots in the sun。If there are more alloy particles or bright spots, it is confirmed that the hydraulic oil has more mechanical equipment residue。At this time, the hydraulic oil should be replaced, or the hydraulic oil should be released, the deposition of no less than 42h is carried out, and then it is filtered out and applied。